Super Cleaning Method
In the following cases, perform "super cleaning."
• If ink discharge issues such as dot drop-out are not corrected after performing cleaning using the cleaning
function (normal, medium, powerful) or manual cleaning.
• If white is uneven even after performing damper cleaning.
• If colors other than white (cyan, magenta, yellow, black, light cyan, light magenta, light black, or orange) are
uneven even after shaking the pouch trays to mix the ink.
IMPORTANT
A large amount of ink will be discharged during super cleaning. Perform this operation only when ink discharge issues such as dot
drop-out, dot displacement, and uneven colors cannot be corrected even after performing cleaning using the other cleaning functions
(normal, medium, powerful, manual, and damper cleaning).
RELATED LINKS
P. 228 "Printing Tests and Normal Cleaning"
P. 231 "Medium Cleaning Method"
P. 233 "Powerful Cleaning Method"
1.
Perform a printing test.
Procedure
1.
Load the media.
2.
Press [FUNCTION].
3.
Press [
▼
], then [
▶
] to display the screen shown below.
CLEANING
TEST PRINT
4.
Press [ENTER].
Printing of the test pattern starts.
5.
Check whether there is dot drop-out or dot displacement in the test pattern.
Missing blocks indicate dot drop-out. Collapsed or inclined blocks indicate dot displacement.
6.
If you have opened the front cover, close it.
Handling Severe Dot Drop-out and Dot Displace-
ment
3. Advanced Maintenance
247
Summary of Contents for TrueVIS VG2-540
