®ÂØÒňÎ
®
TD-6
Total Percussion
Sound Module
TurboStart
TBS141
© 2001 Roland Corporation U.S., 5100 S. Eastern Ave., Los Angeles CA 90040
Faxback # 20174
Page 2
Use the following procedure to adjust the metronome
tempo:
1.
To adjust the tempo (BPM
),
hold down SHIFT
and press CLICK/TEMPO.
2.
Use the INC/+ or DEC/- buttons to select the
desired BPM.
3.
Press EXIT twice when you’re finished.
Use the following procedure to change the
metronome sound:
1.
Press EDIT while the metronome’s playing.
Note
: The CLICK/TEMPO button should be lit.
2.
Press the RIGHT ARROW (
!
) button three
times.
3.
Use the INC/+ or DEC/- buttons to select the
desired sound. Press EXIT when you’re finished.
Changing the Ambience Settings
You can select and make changes to the nine
different ambience types available in the TD-6. Use
the following procedure:
1.
If necessary, press KIT until it’s lit.
2.
Press EDIT/SETUP.
3.
Press the RIGHT ARROW (
!
) once until
“AMBIENCE” shows in the screen.
Note
: To hear the changes you make to the
ambience sounds, strike a pad or hold SHIFT and
PRESS kit.
4.
Press ENTER once, and then use the INC/+ or
DEC/- buttons to turn the ambience on or off.
5.
Press the RIGHT ARROW (
!
) once again and
use the INC/+ or DEC/- buttons to change the
AMBIENCE SEND LEVEL .
6.
Press the RIGHT ARROW (
!
) once again and
use the INC/+ or DEC/- buttons to change the
ambience STUDIO TYPE.
7.
Press the RIGHT ARROW (
!
) once again and
use the INC/+ or DEC/- buttons to select the
ambience WALL TYPE.
8.
Press the RIGHT ARROW (
!
) once again and
use the INC/+ or DEC/- buttons to select the
ambience ROOM SIZE.
9.
Press the RIGHT ARROW (
!
) once again and
use the INC/+ or DEC/- buttons to select the total
AMBIENCE LEVEL (volume).
10. Press EXIT twice when you’re finished.
