background image

28

USING THE UNIT SAFELY

IMPORTANT NOTES

 WARNING

Concerning the Auto Off function

The power to this unit will be turned off automatically 

after a predetermined amount of time has passed since 

it was last used for playing music, or its buttons or 

controls were operated (Auto Off function). If you do not 

want the power to be turned off automatically, disengage the Auto 

Off function (p. 24).

 WARNING

Use only the supplied AC adaptor and the correct voltage

Be sure to use only the AC adaptor supplied with the 

unit. Also, make sure the line voltage at the installation 

matches the input voltage specified on the AC adaptor’s 

body. Other AC adaptors may use a different polarity, or 

be designed for a different voltage, so their use could 

result in damage, malfunction, or electric shock.

Use only the supplied power cord

Use only the attached power cord. Also, the supplied 

power cord must not be used with any other device.

Power Supply

•  Place the AC adaptor so that the side with text is downward.

Repairs and Data

•  Before sending the unit away for repairs, be sure to make a 

backup of the data stored within it; or you may prefer to write 

down the needed information. Although we will do our utmost to 

preserve the data stored in your unit when we carry out repairs, 

in some cases, such as when the memory section is physically 

damaged, restoration of the stored content may be impossible. 

Roland assumes no liability concerning the restoration of any 

stored content that has been lost.

Additional Precautions

•  Any data stored within the unit can be lost as the result of 

equipment failure, incorrect operation, etc. To protect yourself 

against the irretrievable loss of data, try to make a habit of 

creating regular backups of the data you’ve stored in the unit.

•  Roland assumes no liability concerning the restoration of any 

stored content that has been lost.

•  Never strike or apply strong pressure to the display.

•  This instrument is designed to minimize the extraneous sounds 

produced when it’s played. However, since sound vibrations 

can be transmitted through floors and walls to a greater degree 

than expected, take care not to allow these sounds to become a 

nuisance others nearby.

•  When disposing of the packing carton or cushioning material in 

which this unit was packed, you must observe the waste disposal 

regulations that apply to your locality.

•  The rubber portion of the striking surface is treated with a 

preservative to maintain its performance. With the passage of 

time, this preservative may appear on the surface as a white stain, 

or reveal how the pads were struck during product testing. This 

does not affect the performance or functionality of the product, 

and you may continue using it with confidence.

•  Continuous playing may cause dis-coloration of the pad, but this 

will not affect the pad’s function.

•  Do not use connection cables that contain a built-in resistor.

Caution Regarding Radio Frequency Emissions

•  The following actions may subject you to penalty of law.

•  Disassembling or modifying this device.
•  Removing the certification label affixed to the back of this 

device.

•  Using this device in a country other than where it was 

purchased

Intellectual Property Right

•  The copyright of content in this product (the sound waveform 

data, style data, accompaniment patterns, phrase data, audio 

loops and image data) is reserved by Roland Corporation.

•  Purchasers of this product are permitted to utilize said content 

(except song data such as Demo Songs) for the creating, 

performing, recording and distributing original musical works.

•  Purchasers of this product are NOT permitted to extract 

said content in original or modified form, for the purpose of 

distributing recorded medium of said content or making them 

available on a computer network.

•  ASIO is a trademark and software of Steinberg Media 

Technologies GmbH.

•  This product contains eParts integrated software platform of 

eSOL Co.,Ltd. eParts is a trademark of eSOL Co., Ltd. in Japan.

•  The 

Bluetooth

®

 word mark and logos are registered trademarks 

owned by Bluetooth SIG, Inc. and any use of such marks by 

Roland is under license.

•  This Product uses the Source Code of μT-Kernel under T-License 

2.0 granted by the T-Engine Forum (www.tron.org).

•  Roland and V-Drums are either registered trademarks or 

trademarks of Roland Corporation in the United States and/or 

other countries.

•  Company names and product names appearing in this document 

are registered trademarks or trademarks of their respective 

owners.

Summary of Contents for TD-07































Reviews: