background image

 

Main Features

 

• Lightweight, Compact, and Energy-Efficient

 

Employing the latest developments in high-efficiency amplifier technology, the SRA-200E packs a powerful 100 watts per channel (at 8

ohms); yet it weighs a mere 5.0 kilograms, consumes only half the current, and generates just one-third the heat of previous power

amps (in actual operation, compared with previous Roland products). With its compact design, this amp takes up only 1U (1.75-inch

EIA standard rack space), and is only 360 mm deep.

 

• Packed with Features

 

The SRA-200E features three types of input connectors: XLR-3-31 connectors, standard phone TRS jacks, and screw type terminals.

All inputs are balanced. With the Input Level switch, input sensitivity can be switched b4 dBm and -10 dBm, flexibility that

ensures compatibility with a variety of systems. The SRA-200E also features binding post output terminals which can accept either

banana plugs or wide-gauge speaker cables.

 

• Protection Circuits for Added Reliability

 

The SRA-200 features a variety of protection circuits, including the PC Limiter Circuit that guards against shorting in the output, the

Thermal Protection Circuit, the speaker-saving DC Detection Circuit, the Muting Circuit that cuts the "shock noise" that occurs when

the power is switched on, all to ensure dependable operation.

 

• The indicators let you know about signal conditions.

 

With the LEVEL indicator and PROTECTION indicator, you can check to be sure of the amp's operating conditions.

 

• Built-In Limiter

 

The SRA-200 features an internal Limiter Circuit. This provide protection against unpleasant sound and damage to speakers resulting

from clipping in the amp.

 

New ECOS High-Efficiency Amplifier Technology

 

ECOS (Efficiency Control Operation System) is a new high-efficiency amplifier technology developed by Roland. With this technology,

amplifier power consumption is only 1/2 that of previous amps, while generating only 1/3 of the heat, all with no sacrifice in sound quali-

ty. As a result, the heat dissipation and power sections are smaller, making the amplifier lighter and more compact than previous mod-

els.

 

Before using this unit, carefully read the sections entitled: “IMPORTANT SAFETY INSTRUCTIONS” (p. 2),
“USING THE UNIT SAFELY” (p. 3), and “IMPORTANT NOTES” (p. 4). These sections provide important infor-
mation concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a
good grasp of every feature provided by your new unit, this manual should be read in its entirety. The manual
should be saved and kept on hand as a convenient reference.

 

Using The Unit Safely.........................................................3

Important Notes ...................................................................4

Names and Functions..........................................................5

 

Front Panel .......................................................................5

Rear Panel.........................................................................6

 

Connecting Other Devices .................................................8

 

Stereo Connection ...........................................................8

BTL Connection ...............................................................8

Parallel Connection.........................................................9

Precautions When Connecting and Turning on
the Power........................................................................10
Tips about Connection .................................................11

 

About the Protection Circuits..........................................12
About Rack Mounting ......................................................13
Attaching the Rubber Feet ...............................................13
Troubleshooting.................................................................14
Main Specifications...........................................................15
Dimensions .........................................................................16
Index.....................................................................................17

Contents

 

Copyright 

 

1998   ROLAND CORPORATION

 

All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION. 

01677290     ‘02-6-A2-51K

Summary of Contents for SRA-200E



















Reviews: