Roland SP-505, Service Notes

Page: 47 / 48

47
SP-505
because a write-protect sticker is affixed to the memory
card.
>Remove the write-protect sticker from the memory card.
Data cannot be saved because a write-protect sticker is
affixed to the memory card.
>Remove the write-protect sticker from the memory card.
Unsupported Format!
The format of the inserted memory card is a format that
the SP-505 cannot use.
>The SP-505 is able to use only 8-128 MB Smart Media
memory cards with a 3.3 V power supply. Please check
the type of card you are using.
Loading/saving is not possible because the sample or
sequencer data is corrupted.
>Either erase the offending data, or format the
memory card.
You are attempting to load a WAV/AIFF file that
cannot be loaded into the SP-505.
>Read the cautionary notes regarding the loading of
WAV/AIFF files.
System related
Too Busy
The data could not be processed fast enough.
>Operate the buttons or VALUE dial more slowly.
Memory Damaged
The contents of internal memory have been destroyed.
>Perform the Initialize operation as directed by the
display.
Others
Please Update Preset Files.
The preset data is not set. Load the preset data and enter the test mode.
Disk Full
The data form of WAV and AIFF is inaccurate. Please check the data form of
WAV and AIFF.
Turn OFF Power Data Maybe Damaged
SmartMedia is not inserted correctly. Please insert SmartMedia correctly after
shutting off a power supply.
* The following error is displayed and substrate repair is impossible for the
case. Please exchange MAIN BOARD.
ERROR!!!
Fatal Error!!!
Seq System Error!
Sampling Failed!
Internal Memory is Unformatted...
Internal memory is not initialized.
Test mode related
NAND Flash
NAND memory (IC29) error
Bad Block
NAND memory (IC29) error
DRAM
DRAM(IC38) error
CPU RAM
CPU (IC33) internal RAM error
MR2 Busy
MR2(IC10) BUSY check error
MR2 IRAM
MR2 (IC10)internal RAM error
Effect RAM
MR2 External RAM(IC52) error
MR2 Read/Write
MR2 (IC10) RAM read and write error
Other SW Pressed
SW read error. Also displayed when two buttons are pressed at once.
Other Knob Moved
CTRL knob operation error
Reverse-Rotated
The encoder has been turned in the wrong direction.
Not Protected
The SmartMedia with preset data has no write-protect sticker.
No Card
The SmartMedia is not inserted.
Wrong Card
There are not necessary files on the SmartMedia.
It is not in SP505 format.
File read failed.
Protected
The SmartMedia is protected.