background image

1110 W. Butler Rd., Suite C

Greenville, SC 29607

866.597.1110 Phone  864.752.1042 Fax

www.eleventencolor.com

TM

ElevenTen Color Ink Conversion Guide

CONVERSION PROCEDURES

pg 3

Conversion from Roland Eco-Sol Max Ink to ElevenTen Color R-1121 
Series Ink

The following conversion procedure is designed to convert your Roland printer from the Roland Eco-
Sol Max inkset to the ElevenTen Color R-1121 Series inkset. This procedure can be used for either a 
CMYKx3 or CMYKLcLm x 2 ink con

fi

 guration as long as the ElevenTen Color inkset matches the con

fi

 gu-

ration that is currently installed.  The ElevenTen Color R-1121 Series inkset has been speci

fi

 cally formu-

lated to be a fully compatible color match, thereby eliminating the need to 

fl

 ush the printer with cleaning 

solution or generate new ICC pro

fi

 les.

Failure to implement this procedure as detailed in this document may cause damage to your printer. 
ElevenTen Color cannot be held responsible for damage caused by the improper implementation of this 
procedure. If any further information is required about which procedure you need to perform, please con-
tact ElevenTen Color Technical Support for further information or instructions.

Pictorial Signs

Pictorial Signs are used as a visual reference to quickly inform users of certain safe practices that must be 
carried out or to warn of pending danger.

All personnel mixing and handling these products must wear gloves and eye protection. 
Clean up spills immediately. If ink does come in contact with skin, wipe ink off with a clean, 
dry, absorbent cloth (do not use solvent or thinner). Wash the affected area with soap and 
water. Consult the ElevenTen Color R-1121 Series Material Safety Data Sheet for further 
instructions and warnings. 

!

For your own safety wear safety glasses

This symbol indicates a prohibited behavior - refrain from doing

This is a caution symbol, advising of possible error or harm 

For your own safety wear safety gloves

Summary of Contents for SolJet Pro II










Reviews: