Roland SolJet Pro II V SC-545EXW, Manual, Page: 11 / 39

1-2 Printing on Transparent Media
9
Notice on drawing white layer of the image
Make sure that you set the color of any objects in the white layer of the image between K0% and K100% in the
CMYK mode. This rule also applies when you want to use gradient colors.
3.
Start up Roland VersaWorks on your computer.
Check the printer model and status in the main window.
4.
Assign the settings for printing the white layer of the image to queue folder B.
❶
Double-click .
❷
In the [Queue B Properties] dialog box that appears, make the following settings.
Make sure that all the settings for the setup items other than listed below are left as their initial defaults.
* It is recommended that you use the optional media drier. The dry time setting here (15 minutes) applies when
you use the media drier.
❸
Click OK to close the [Queue B Properties] dialog box.
Icon
Quality
Printer Controls
Cut Controls
Setup item
Media Type
Mode
Use Custom Settings
Dry Time*
Operation Mode
Return to Origin After Print
Setting
"Clear PET Film" or "PET Clear Film, Adhesive"
White (v) W-PASS
On
15 Minutes
Print Only
On