manualshive.com logo in svg

Roland SK-50, Owner'S Manual

Share
Download
Roland SK-50 Owner'S Manual Download Page 7

Rear Panel

15. Audio INPUT Jacks (RCA Phono Jacks) (

☞

p. 8)

These jacks accept the input of audio signals coming from some external unit. These signals are
mixed with the audio produced by the SK-50 itself, and then output through the speakers and
the audio OUTPUT jacks. 

16. Audio OUTPUT Jacks (RCA Phono Jacks) (

☞

p. 8)

These jacks provide output of the sound produced by the SK-50, along with whatever sound

that is input to the audio INPUT jacks.

17/18. MIDI IN/OUT Connector (

☞

Ensemble Volume p. 6)

These connectors allows for communication with other MIDI devices. The connections must be

made using special MIDI cables. 

19. COMPUTER Connector (

☞

Ensemble Volume p. 3)

This connector provides for communication with a computer, using its serial interface. 

20. COMPUTER Switch (

☞

Ensemble Volume p. 3)

Provides for selection of the serial interface mode.

21. PEDAL Jack (

☞

p. 9)

Accepts connection of an optionally available pedal switch (DP-2, DP-6, BOSS FS-5U, or the
like), or an expression pedal (such as the EV-5).  Once you have an Expression pedal connected,
you can select the function that you wish the pedal to provide (

☞

p. 25).

22. DC IN (AC Adaptor) Jack (

☞

p. 7)

Connect the supplied AC Adaptor to this jack. 

23. Cord Hook (

☞

p. 7)

To prevent the AC adapter cord from being accidentally disconnected, it should be looped

around this hook to fix it in place. 

OUT

IN

MIDI

COMPUTER

PEDAL

DC IN 9V

1200mA

OUTPUT

INPUT

RS422

MIDI

RS232C-1

RS232C-2

USE ROLAND ACK, ACB

ADAPTOR ONLY

L

R

15 16

17

18

19

20

21

22

23

6

Summary of Contents for SK-50






























Reviews:

No comments

Brands by name

Popular brands

Load more brands