3
SI-AD4 / SO-DA4 Installation Manual
The rules for installing modules (SI-AD4/SO-DA4) are as follows.
Be sure to follow these rules when installing.
■
The modules installed in a device serving as the counterpart to a device
for which the REAC mode is Master need to be of a different type.
Module Installation Rules
= SI-AD4
= SO-DA4
On a Slave or Split device,
leaving slots 1 and 2 empty
poses no problem.
SI
SO
SI
SI
SI
SI
SI
SI
SI
SI
SI
SI
SI
SI
SI
SI
SI
SI
SI
SI
SO SO SO
SO SO
SO SO
SO SO
SO
You must not begin an installation
from an even-numbered slot.
Empty
Empty Empty
Never insert modules of a different type
in the middle of a series of identical modules.
SI
SI
SI
SI
SI
SO SO SO SO
Modules of a different type
cannot be installed
in even-numbered slots first.
■
Installation must start from an odd-numbered slot.
■
Group together modules
of the same type.
■
On a device for which the
REAC mode is Master,
be sure to install modules
in slots 1 and 2.
Never leave slots 1 and 2
on a Master device empty.
Master device
Slave/Split
device
No audio is transmitted to empty slots.
The audio input into the Master device is transmitted to the modules
on the connected device (a Slave device or the like).
No audio can be transmitted when the modules installed on the
connected device (a Slave device or the like) are of the same type.
Signals can be transmitted from a Slave device to the Master device.
However, transmission from a Split device to the Master device
is not possible.
SI-AD4
SI-AD4
SI-AD4
SI-AD4
SI-AD4
SI-AD4
SI-AD4
SI-AD4
SI-AD4
SI-AD4
SI-AD4
SI-AD4
SO-DA4
SO-DA4
SO-DA4
SO-DA4
SO-DA4
SO-DA4
SI-AD4_r_e.fm 3 ページ ２００５年１２月２２日 木曜日 午後５時１７分
