Roland SF-200, Setup Manual

Page: 38 / 50

3.
Insert the ink cartridge for each color.
IMPORTANT
Be sure to hold the handle of the front cover and open and close it gently.
A
Before inserting ink cartridges, shake each of them 50 times (about 15 seconds).
The precipitation of the ingredients in the ink disables printing in normal color. So that the ink mixes well,
shake the ink cartridge horizontally with a stroke length of around 5 cm (2 in.) from each end of the ink
cartridge.
B
When the following screen is displayed, insert an ink cartridge for each color.
SET CARTRIDGE
123456
Insert the ink cartridge for each color.
When ink cartridges are inserted in all the slots, the following screen appears.
FILLING INK...
>
C
When the following screen is displayed, open the panel cover.
EMPTY
DRAIN BOTTLE
D
Remove the drain bottle and discard the discharged fluid.
IMPORTANT
When you remove the drain bottle, a few drops of discharged fluid may come out of the machine. Exercise caution to
prevent this fluid from soiling your hands.
Setting Up the Machine
36
2.Installation