background image

 

3

 

IMPORTANT NOTES

 

291a

 

In addition to the items listed under “USING THE UNIT SAFELY” on page 2, please read and 
observe the following:

 

Placement

 

354a

 

• Do not expose the unit to direct sunlight, place it near devices that radiate heat, leave it inside an enclosed vehicle, 

or otherwise subject it to temperature extremes. Excessive heat can deform or discolor the unit.

 

Maintenance

 

401a

 

• For everyday cleaning wipe the unit with a soft, dry cloth or one that has been slightly dampened with water. To 

remove stubborn dirt, use a cloth impregnated with a mild, non-abrasive detergent. Afterwards, be sure to wipe 
the unit thoroughly with a soft, dry cloth.

 

402

 

• Never use benzine, thinners, alcohol or solvents of any kind, to avoid the possibility of discoloration and/or 

deformation.

 

Additional Precautions

 

553

 

• Use a reasonable amount of care when using the unit’s buttons, sliders, or other controls; and when using its jacks 

and connectors. Rough handling can lead to malfunctions.

 

556

 

• When connecting / disconnecting all cables, grasp the connector itself—never pull on the cable. This way you will 

avoid causing shorts, or damage to the cable’s internal elements.

 

558b

 

• To avoid disturbing your neighbors, try to keep the unit’s volume at reasonable levels (especially when it is late at 

night).

 

988

 

• Security Slot (

)

http://www.kensington.com/

RT-10KST_e.fm 3 ページ 2006年3月30日 木曜日 午後1時55分

Summary of Contents for RT-10K



















Reviews: