Roland RG-7 Owner'S Manual Download Page 76

Page: 76 / 124

Chapter 4. Recording the Performance

■

Notes Regarding Recording

You can store your recorded performances to the “Favorites” (p. 25). If not first saved

to the “Favorites,” recorded performances are erased when the RG-7’s power is

turned off. If you want to retain such performances, be sure to save them to the

“Favorites.”

You can also record your performances using external audio equipment (p. 97) and

save performance data to USB memory (sold separately) connected to the Ext

Memory port (p. 76).

Recording Performances

Select the tone you want to perform with (p. 53).

Press the [Function] (Exit) button, getting its indicator to light.

Press the [Song] (Select -) button or [

] () button to display

the RECORD screen.

fig.

Press the [Moving Key] (Enter) button.

The following screen appears, and the RG-7 goes into recording standby.

fig.

Start Recording

Play the keyboard to begin recording.

Recording starts, and the following screen appears.

The text “Recording...” flashes while recording is in progress.

fig.

RG-7_e.book 74 ページ２００７年１２月２１日　金曜日　午前９時２４分

Summary of Contents for RG-7





























































































































Search results

Summary of Contents for RG-7

Reviews:

Brands by name

Popular brands

Roland RG-7, Owner'S Manual

Search results

Summary of Contents for RG-7

Reviews:

Brands by name

Popular brands