®ÂØÒňÎ
®
AT-5
Atelier organ
TurboStart
TBS200 ©2003 Roland Corporation U.S., 5100 S. Eastern Ave., Los Angeles CA 90040 Faxback # 20233 Page 2
Playing a Song from Disk
Use the following procedure to play a song from disk:
1. Insert a compatible music disk (i.e. SMF or
Atelier format) into the drive.
2. Use the SELECT [+] and [-] buttons in the
COMPOSER section (located to the left of the
disk drive) to select a song.
3. Press the PLAY/STOP button to play the song.
4. Press the PLAY/STOP button again to silence
the organ.
Refer to the Owner’s Manual, pp. 40–41 for more
information.
Recording a Song
Use the following procedure to Record a Song using
automatic accompaniment:
1. Make sure there is no disk in the drive.
2. Press the SELECT [+] button in the COMPOSER
section (located to the left of the disk drive) to
select “New Song” on the screen.
Note:
If “Clear Song Sure?” appears on the screen,
press the REC button to clear the song memory.
3. Select a Music Style as described under
“Selecting Music Styles.”
4. Select an automatic accompaniment as
described under “Selecting One Touch
Programs.”
5. Press the REC button in the COMPOSER
section.
Note:
The REC button indicator will light and the
PLAY/STOP button will blink.
6. Play a note on the lower keyboard to start the
automatic accompaniment and play a melody on
the upper keyboard.
7. Press the PLAY/STOP button when you are
done.
8. Press the RESET button.
9. Press the PLAY/STOP button to play the song.
Refer to the Owner’s Manual, pp. 43–45 for more
information.
Saving a Recorded Song to Disk
Use the following procedure to save a recorded song
to disk:
1. Record a song as described under “Recording a
Song.”
2. Insert a formatted disk in the drive.
Note:
Make sure the disk was formatted on an AT-5
(Refer to the Owner’s Manual, pp. 48–49 for more
information.)
3. Press the SAVE button in the COMPOSER
section (located to the left of the disc drive.)
4. Use the VALUE [+] and [-] buttons to select a
format.
Note:
Songs saved in ORIGINAL format will only play
on Atelier Organs; Songs saved in SMF (Standard
MIDI File) format will play on any SMF compatible
instrument, regardless of manufacturer.
5. Press the SAVE button.
Refer to the Owner’s Manual, pp. 51–52 for more
information.
Selecting Harmony Intelligence
Use the following procedure to select Harmony
Intelligence:
1. Press the HARMONY INTELLIGENCE button
(located to the right of the screen) until its
indicator is lit.
2. Use the VALUE [+] and [-] buttons (located to the
left of the screen) to select a Harmony
Intelligence (e.g. Strings or Traditional.)
3. Press the HARMONY INTELLIGENCE button.
Refer to the Owner’s Manual, pg. 32 for more
information.
