Installing the Machine
20
Step 2 : Removing the Retainers
Attach the retainers to protect the machine from vibration during shipment. When installation is complete,
remove these and store them in the specified locations.
WARNING
Carry out these operations before you connect the power cord.
The power turning on inadvertently during these operations may result in
pinched hands or other injury.
Important
• Remove all the retainers. Any that remain may cause faulty operation or a breakdown
when the power is switched on.
•
The retainers will be required when moving the machine to a different location. Secure
them to this machine for storage so that they do not get misplaced.
Procedure
A
Remove the retainers in the locations shown in the following figure using a hexagonal
wrench. (2 locations)
B
Secure the removed retainers in place at the location shown in the following figure.
Use the screws that you removed in step
A
.