15
Jan. 2014
ME-80
Connection Diagram
fig.connection-e.eps
Entering the Test Mode
1.
Refer to the connection diagram, connect the respective pieces of equipment.
2.
Adjust the
PEDAL FX
control to
FREEZE
.
3.
Turn down all controls other than the
PEDAL FX
control all the way counterclockwise (minimum).
* The Test Mode is not entered unless the control is turned all the way.
4.
Hold down
WRITE
and
CTL
and press
POWER
for 1 second or longer.
5.
When
80
appears on the 7-segment LED display, release your hand.
The version appears on the 7-segment LED display.
Quitting the Test Mode
Press
POWER
for 1 second or longer to switch off the power.
Skipping Test Items
To advance to the next test item, hold down
EXIT
and press
WRITE
. Returning to the previous test item is not possible.
Test Items
1. Version Check and Device Check
2. Current-consumption Check, Voltage Detection Check and SW/LED Check
Summary of Contents for ME-80
