20
Place Z0 sensor on the base
Refer to User’s manual Chapter 5 Appendix , 5-1
‘Using the Z0 Sensor’ for details of how to use
the Z0 sensor.
Setting the Z-axis Origin Point
1
2
3
Use cursor keys to move the tool to the position
above the sensor.
Set Z0 sensor from VPanel
KJ
heck [Set Z origin using sensor]
LJ
lick [Detect]
MC
he tool slowly descends until it makes contact with
the sensor.
When the tool rises and stops, the setting operation is
complete.
N
Remove the Z0 sensor from the base and use the
cursor keys to lower Z onto surface of base material to
confirm Z coordinate reads [0.00].
<$=>1hi+<=$(>1CGAFAi1J($$*#B1$E=
^GA=1G#'1D&%F>*=)=
Z0 indicates the position where the coordinate value is set "0" as the origin of Z coordinate.
