■
CONTENTS AND ASSEMBLING
Before starting, identify the left (L) and right (R) sides, as marked with stickers on top of the upright tube.
Adjust the stand to any position desired by loosening the clamp knobs and rotating the fittings. Be sure to re-tighten the clamp knobs
when you achieve the setup you want.
* Slight modifications may have been made in the parts making up the Drum Stand, so the illustration may not provide an exact depic-
tion.
L
R
Set it to the desired position.
3/16 inches hexagonal wrench
Cable ties
Cable tie
Cable clip
Cable
Pipe
Cable clips
Owner’s manual (this manual)
Pipe
Cable
OWNER’S MANUAL
We’d like to take a moment to thank you for purchasing the Roland MDS-7U (Trap
Stand / Stage Stand / Compact Stand).
Before using this unit, carefully read the sections entitled: “USING THE UNIT
SAFELY” (p. 2) and “IMPORTANT NOTES” (p. 2). These sections provide
important information concerning the proper operation of the unit. Additionally, in
order to feel assured that you have gained a good grasp of every feature provided
by your new unit, this manual should be read in its entirety. The manual should be
saved and kept on hand as a convenient reference.
Copyright © 1997 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in
any form without the written permission of ROLAND CORPORATION.
01238245
®
3
Summary of Contents for MDS-7U
Page 1: ...MDS 7U P 2 P 2 1997 01238245...
Page 2: ...MDH 7U MDY 7U 2...
