background image

 

7

 

(Add)

 

• Assemble the KD-85 with care to avoid danger of 

pinching the fingers.

............................................................................................................

 

(Add)

 

• To keep the KD-85 from slipping or moving during 

play, the tips of the legs installed on the stand are 
pointed. Handle with care to avoid injury.

............................................................................................................

 

(Add)

 

• This unit is shipped from the factory with the head 

tension loosened. Be sure to tighten the tension 
before use. Striking the head when the head tension 
is loose may damage the sensor and head.

............................................................................................................

 

291a

 

In addition to the items listed under “USING THE UNIT SAFELY” on pages 6–7, please read and observe the following:

 

Placement

 

354a

 

• Do not expose the unit to direct sunlight, place it near 

devices that radiate heat, leave it inside an enclosed 
vehicle, or otherwise subject it to temperature extremes. 
Excessive heat can deform or discolor the unit.

 

355b

 

• When moved from one location to another where the 

temperature and/or humidity is very different, water 
droplets (condensation) may form inside the unit. Damage 
or malfunction may result if you attempt to use the unit in 
this condition. Therefore, before using the unit, you must 
allow it to stand for several hours, until the condensation 
has completely evaporated.

 

356

 

• Do not allow rubber, vinyl, or similar materials to remain 

on the unit for long periods of time. Such objects can 
discolor or otherwise harmfully affect the finish.

 

Maintenance

 

401a

 

• For everyday cleaning wipe the unit with a soft, dry cloth 

or one that has been slightly dampened with water. To 
remove stubborn dirt, use a cloth impregnated with a mild, 
non-abrasive detergent. Afterwards, be sure to wipe the 
unit thoroughly with a soft, dry cloth.

 

402

 

• Never use benzine, thinners, alcohol or solvents of any 

kind, to avoid the possibility of discoloration and/or defor-
mation.

 

Additional Precautions

 

553

 

• Use a reasonable amount of care when using the unit’s 

buttons, sliders, or other controls; and when using its jacks 
and connectors. Rough handling can lead to malfunctions.

 

556

 

• When connecting / disconnecting all cables, grasp the 

connector itself—never pull on the cable. This way you will 
avoid causing shorts, or damage to the cable’s internal 
elements.

 

558a

 

• To avoid disturbing your neighbors, try to keep the unit’s 

volume at reasonable levels. You may prefer to use 
headphones, so you do not need to be concerned about 
those around you (especially when it is late at night).

 

558d

 

• This instrument is designed to minimize the extraneous 

sounds produced when it’s played. However, since sound 
vibrations can be transmitted through floors and walls to a 
greater degree than expected, take care not to allow these 
sounds to become a nuisance to neighbors, especially when 
performing at night and when using headphones.

 

559a

 

• When you need to transport the unit, package it in the box 

(including padding) that it came in, if possible. Otherwise, 
you will need to use equivalent packaging materials.

 

IMPORTANT NOTES

 

 

This product complies with the requirements of European Directive 89/336/EEC.

For EU Countries

KD-85_e 7 ページ 2005年5月12日 木曜日 午前10時47分

Summary of Contents for KD-85









Reviews: