Roland IU-1000F Operating Instructions Manual Download Page 47

Page: 47 / 144

Turning On/Off the Power

Turning Off the Power

Before you turn off the power, confirm:

•

Data is not being received from a computer.

•

There is no data that has not been output yet.

•

The carriage is placed in the maintenance station.

•

There is no error message displayed.

Exit Print Control.

Confirm that the cooling fan for the UV lamp has stopped, and then press the power-off

button on the front of the machine.

The power lamp will turn off.

•

If you find an error while turning off the power, resolve the error. For details, see page 103 "If a

Message Appears".

•

Do not unplug the power cord plug. If the power cord plug is unplugged, the negative pressure

adjustment function does not work, which may cause ink to leak from the nozzles.

•

Confirm that the carriage is returned to the maintenance station position before turning off the

power. If you turn off the power before the carriage returns to the maintenance station position, the

print heads will get dry, which may cause nozzle clogging.

•

Do not turn off the power during printing. Otherwise, the carriage may not return to the maintenance

station.

•

You cannot turn off the power by pressing the emergency button.

Summary of Contents for IU-1000F

















































































































































Search results

Summary of Contents for IU-1000F

Reviews:

Related manuals for IU-1000F

Brands by name

Popular brands

Roland IU-1000F, Operating Instructions Manual

Search results

Summary of Contents for IU-1000F

Reviews:

Related manuals for IU-1000F

Brands by name

Popular brands