background image

 

10

 

PROGRAM CHANGE NUMBERS

 

A Program Change number is selected using the “Bank” button and “Number” pedals. 
The Program Change message is transmitted the moment the Bank Shift button or 
Number pedal is pressed.

 

Changing Banks

 

Pressing a Bank Shift button (UP or DOWN) changes Bank numbers in sequence (0 to 
12). The Bank Display shows the Bank Number currently selected.

 

fig.06

 

* When Bank 10, 11 or 12 is selected, the Dot in the upper left hand corner of the display will light.

 

Bank numbers 0 to 12 correspond to Program Change numbers as indicated in the following:

 

fig.07

 

You can change Bank numbers using a pedal by connecting a foot switch (BOSS 

FS-5U: optional) to the BANK SHIFT Jacks (UP/DOWN) on the rear of the GFC-50.

 

* When using the FS-5U, set the polarity switch as shown below.

 

fig.07a

 

Changing Numbers

 

Using the Number Shift (A/B) Pedal and the Number Pedals, you can select numbers 1 to 10. 
Numbers 1 to 10 correspond to Program Change numbers 1 to 10 respectively. By selecting A 
or B with the Number Shift Pedal, you can select numbers 1 to 5 or 6 to 10 as shown below.

 

fig.08

 

With the Number Indicators and Number Shift Indicators, you can determine what 
number is currently set.

Display

Banks

0

1

2

10

11

12

Banks

Program

Change Number

0

0

1

2

10

11

12

10

20

100

110

120

Polarity switch

A

B

6

7

8

9

10

1

2

3

4

5

1/6

2/7

3/8

4/9

5/10

Summary of Contents for GFC-50









































Reviews: