135
Various Settings
You can restore the settings you’ve changed on the FP-7 to
their factory-set condition. This operation is called “Factory
Reset.”
When you perform a Factory Reset, all the settings
you have stored will be erased, and the FP-7 will
return to the factory-set condition. This operation will
not restore the contents of internal memory to the
factory-set condition.
Refer to “Initializing Internal Memory” (p. 132).
1.
Turn the volume to the minimum, and press the
[Power] switch to turn off the power.
2.
Hold down the [Function] button, and press the
[Power] switch to turn on the power.
Continue pressing the [Function] button until the
following display appears.
When the Factory Reset is completed, the Tone screen
will appear.
If you activate the Panel Lock function, buttons will not operate
when they are pressed. You can use this to prevent children
from inadvertently changing the settings by pressing buttons.
1.
Hold down the [Function] button and press the
[Equalizer] button.
A lock symbol will appear in the screen as follows.
Releasing the Panel Lock
1.
Hold down the [Function] button and press the
[Equalizer] button.
The lock symbol will disappear from the screen.
If you have pressed a Tone button to select a tone
before you activate Panel Lock, you’ll be able to play
the specified tone. You can’t change tone while
Panel Lock is active.
Other Settings
Restoring the Factory-set Condition
(Factory Reset)
NOTE
Disabling the Buttons (Panel Lock)
FP-7-e.book 135 ページ ２００６年１２月１４日 木曜日 午前１０時５７分
Summary of Contents for FP-7
