Roland FP-4, Owner'S Manual

Page: 19 / 140

19
Before You Play
You can use headphones to enjoy the FP-4 without disturbing
those around you, such as at night. Since the FP-4 has two
headphone jacks, two people can also use headphones
simultaneously.
If you’re using only one set of headphones, you may connect
them to either of the two headphone jacks.
fig.Headphones.eps
1.
Plug the headphones into the Phones jack.
If headphones are connected, no sound will be output
from the FP-4’s speakers.
2.
Use the FP-4’s [Volume] knob (p. 17) to adjust
the headphone volume.
Cautions when Using Headphones
• To prevent damage to the cord’s internal conductors,
avoid rough handling. When using headphones, mainly
try to handle either the plug or the headset.
• Your headphones may be damaged if the volume of a
device is already turned up when you plug them in.
Minimize the volume before you plug in the headphones.
• Excessive input will not only damage your hearing, but
may also strain the headphones. Please enjoy music at an
appropriate volume.
• Use headphones that have a stereo 1/4” phone plug.
Listening through Headphones
Headphones
FP-4-e.book 19 ページ ２００７年５月２４日 木曜日 午後７時１０分