Roland Fantom XR Owner'S Manual Download

Page: 137 / 284

137

Adding Effects

Reverb Output

fig.22-023a

Reverb Output Level

Adjusts the volume of the sound that has passed through
reverb.

Value:

0–127

Reverb Output Assign

Specifies how the sound routed through reverb will be output.

Value

Output to the OUTPUT A (MIX) jacks in stereo.

Output to the OUTPUT B jacks in stereo.

If the Mix/Parallel parameter is set to “MIX,” all sounds are
output from the OUTPUT A (MIX) jacks in stereo (p. 158).

Mastering Effect

fig.22-030

Mastering effect settings apply to the entire Fantom-XR. These
settings are not for individual patches or performances.

For details on the Mastering Effect, refer to

“Mastering Effects”

(p.

146).

MFX Control

To access the MFX Control screen

From the Effect Edit Menu screen, turn the VALUE dial or
use [INC][DEC] to select “CTRL.”

fig.22-0052

Press [ENTER].

Control 1–4 Src (Multi-Effects Control Source 1–4)

Sets the MIDI message used to change the multi-effects parameter
with the multi-effects control.

Value

OFF:

Multi-effects control will not be used.

CC01–31, 33–95:

Controller numbers 1–31, 33–95

For more information about Control Change messages, please
refer to

“MIDI Implementation”

(p. 245).

PITCH BEND:

Pitch Bend

AFTERTOUCH:

Aftertouch

SYS CTRL1–SYS CTRL4:

MIDI messages used as common multi-
effects controls.

Fantom-XR_r_e.book 137 ページ２００６年４月４日　火曜日　午前１０時１４分

Summary of Contents for Fantom XR





























































































































































































































































































Search results

Summary of Contents for Fantom XR

Reviews:

Related manuals for Fantom XR

Brands by name

Popular brands

Roland Fantom XR, Owner'S Manual

Search results

Summary of Contents for Fantom XR

Reviews:

Related manuals for Fantom XR

Brands by name

Popular brands