Roland Fantom-S88, Service Notes

Page: 29 / 51

30
Apr.2003
12.
Turn on the power of the computer.
13.
Use a USB cable to connect the computer to the Fantom-S. (The computer
will detect the Fantom-S as a removable disk drive.)
Verify that the LCD display of the Fantom-S indicates “ [USB STATUS]
connected. “
14.
Insert the UPDATE CD-ROM (#17041312) into your computer, and
navigate to the “Roland” folder of the CD-ROM.
15.
Copy the file “fans.bin” file (located within the “Roland” folder) to the
Fantom-S (removable disk).
The Fantom-S will receive the data from the computer.
Verify that the LCD display of the Fantom-S indicates “ [USB STATUS]
Receiving.. “
When the LCD display of the Fantom-S shows the “ [USB STATUS]
Connected. “ indication for ten seconds or longer, this indicates that the
copy has been completed.
16.
On your computer, use the Safely Remove Hardware icon in the taskbar
at the lower right of the screen to disconnect the Fantom-S from your
computer.
17.
Press the [ENTER] button. After a time, the display will indicate
“Completed. Please, PowerOff.” The update procedure has been
completed.
18.
Turn the power of the Fantom-S off and then on again, and perform the
version check and execute Test mode.
Cautions when updating via USB
After you have pressed the [ENTER] button at the end of the procedure
described above, never turn off the power of the Fantom-S until the indication
of “Completed. Please, PowerOff.” has appeared. If the power is turned off
during this time, the program will be erased.
You must restart your computer before you begin the update procedure.
2. Updating from SmartMedia via the
Fantom’s SmartMedia card slot
Required items
• UPDATE DATA FOR SERVICE CD-ROM (#17041312)
• Computer (the OS can be either Windows Me, Windows 2000, or
Windows XP)
• You cannot use a Mac under any circumstances.
• Two SmartMedia cards (one with 32 MB or more free space, one with 64
MB or more free space (used to back up user data))
* In addition, substitution to PC is possible for user data back up.
• SmartMedia reader/writer
If user memory contains important data, save the data (refer to Saving and
Loading User Data) before you perform the update procedure.
Procedure
1.
Create an update card.
2.
Turn on the power of your computer.
3.
Insert a 32 MB or larger SmartMedia card into the SmartMedia reader/
writer connected to your computer, and format it.
4.
Insert the UPDATE CD-ROM (#17041312) into your computer, and
navigate to the “Roland” folder within the CD-ROM.
5.
Copy the entire “Roland” folder with its contents onto the SmartMedia
card.
6.
Turn on the power of the Fantom-S.
7.
Press the [MENU] button to access the Menu window.
8.
Use the [CURSOR] up/down buttons to select “System,” and then press
the [ENTER] button.
9.
The System Setup screen will appear, and the LCD display will show as
follows.
fig.up1
10.
Press the [4] button “System Info.”