97
Creating a Patch
Over
view
Sound 1
Sound 2
Sound 3
Pad
Sampler
Menu/System
Appendix
Sequencer
Pitch Env Time 4 Velocity Sens
Use this parameter when you want key release speed to affect the
Time 4 value of the pitch envelope. If you want Time 4 to be speeded
up for quickly released notes, set this parameter to a positive (+)
value. If you want it to be slowed down, set this to a negative (-)
value.
Value:
-63– +63
Pitch Env Time Key Follow
Use this setting if you want the pitch envelope times (Time 2–Time
4) to be affected by the keyboard location. Based on the pitch
envelope times for the C4 key, positive (+) settings will cause notes
higher than C4 to have increasingly shorter times, and negative (-)
settings will cause them to have increasingly longer times. Larger
settings will produce greater change.
Value:
-100, -90, -80, -70, -60, -50, -40, -30, -20, -10, 0, +10,
+20, +30, +40, +50, +60, +70, +80, +90, +100
fig.06-031.e
Hold Bend
This specifies whether pitch bend will be disabled (ON) or enabled
(OFF) while it’s being held by the pedal and during the release
portion of the sound.
Value:
OFF, ON
Bend Mode
Specifies what will happen when you operate the pitch bend lever.
Value
NORMAL:
The pitch bend lever will apply in the conventional
way.
TOUCH:
Moving the pitch bend lever will change the pitch
smoothly, but the pitch will instantly return to
center if you return the lever even slightly.
CATCH:
If you play a note-on with the pitch bend lever
already moved, the pitch will sound at the center
position. The pitch will change only after the lever
has passed through the center position.
LAST:
The pitch bend lever will apply only to the last-
played note.
CATCH+LAST:
The operation of “CATCH” and “LAST” will be
combined.
Bend Mode Control
This specifies the CC (control change) whose value is used to switch
the pitch bend lever’s operation between the mode specified by Bend
Mode (control values 64 or higher) and conventional operation
(control values 63 or lower).
Value
: CC01–31, CC32(OFF), CC33–95
Pitch Env (Pitch Envelope)
Pitch Env Depth
Adjusts the effect of the Pitch Envelope. Higher settings will cause
the pitch envelope to produce greater change. Negative (-) settings
will invert the shape of the envelope.
Value:
-12– +12
Pitch Env Time 1–4
★
Specify the pitch envelope times (Time 1–Time 4). Higher settings
will result in a longer time until the next pitch is reached. (For
example, Time 2 is the time over which the pitch changes from Level
1 to Level 2.)
Value:
0–127
fig.06-032.e
Pitch Env Level 0–4
Specify the pitch envelope levels (Level 0–Level 4). It determines
how much the pitch changes from the reference pitch (the value set
with Coarse Tune or Fine Tune on the Pitch screen) at each point.
Positive (+) settings will cause the pitch to be higher than the
standard pitch, and negative (-) settings will cause it to be lower.
Value:
-63– +63
C4
C3
C2
C1
C5
C6
C7
0
+50
+100
-50
-100
Key
Time
T1
T2
T3
T4
L3
L4
L2
L1
L0
Note off
Pitch
Time
Note on
T: Time L: Level
Fantom-G_r_e.book 97 ページ ２００９年７月２日 木曜日 午後２時５５分
