293
System Settings (Settings Common to All Modes)
Over
view
Sound 1
Sound 2
Sound 3
Pad
Sampler
Menu/System
Appendix
Sequencer
Knob Slider Mode
Specifies whether, when a knob or slider is moved, its position will
immediately be output as control data (DIRECT) or whether control
data will be output only after the knob or slider position has passed
through the value of the parameter (CATCH).
If you select “MULTI” as the Knob Slider Mode setting, you’ll be
able to use the knobs, sliders, D Beam, and S1/S2 buttons to
simultaneously control multiple parts (each part whose keyboard
switch is on).
Value
DIRECT:
Moving a knob or slider will always transmit the
control data of its current position
CATCH:
When you move a knob or slider, it will begin
transmitting control data only when its position
passes the value of the parameter
MULTI:
The knobs, sliders, D Beam, and S1/S2 buttons will
simultaneously control multiple parts (each part
whose keyboard switch is on). The knobs and sliders
will operate in the same way as “DIRECT.”
MULTI (multi-part control) will control multiple parts only if
CC, AFTERTOUCH, or PITCH BEND is assigned to the
controller.
Depending on the parameter being controlled with the sliders
or controls, you may not be able to obtain the CATCH effect,
even though you’ve set the Knob Slider Mode to “CATCH.”
Knob Assign Select
Specifies whether the operation of knobs 1–4 will automatically
change according to the screen (SCREEN) or will be fixed at the
Knob 1–4 Assign settings (FIX).
Value:
FIX, SCREEN
Knob Assign Source
Specifies whether the operation of knobs 1–4 will follow the system
settings Knob 1–4 Assign (SYS) or the setting of the live set or studio
set (TEMP).
Value:
SYS, TEMP
Knob 1–4 Assign
Specify the functions that will be controlled by the knobs.
Value
OFF:
Off
CC01–31, CC32(OFF), 33–95:
Control Change
AFTERTOUCH:
Aftertouch
PITCH BEND:
Pitch Bend
ARPEGGIO ACCENT:
Arpeggio accent rate
ARPEGGIO SHUFFLE:
Arpeggio shuffle rate
ARPEGGIO OCT UP:
The range in which the arpeggio is
sounded will rise in steps of an octave.
ARPEGGIO OCT DOWN:
The range in which the arpeggio is
sounded will lower in steps of an octave.
MASTER LEVEL:
DIGITAL/USB INPUT LEVEL:
Digital/USB Input Level (p. 258)
*
the system setting will be used. If this is “TEMP,” the setting of the
live set or studio set will be used.
Slider Assign Select
Specifies whether the operation of sliders 1–8 will automatically
change according to the screen (SCREEN) or will be fixed at the
Slider 1–8 Assign settings (FIX).
Value:
FIX, SCREEN
Slider Assign Source
Specifies whether the operation of sliders 1–8 will follow the system
settings Slider 1–8 Assign (SYS) or the settings of the live set or
studio set (TEMP).
Value:
SYS, TEMP
Slider 1–8 Assign
Specify the functions that will be controlled by the sliders.
Value
OFF:
Off
CC01–31, CC32(OFF), 33–95:
Control Change
AFTERTOUCH:
Aftertouch
PITCH BEND:
Pitch Bend
ARPEGGIO ACCENT:
Arpeggio accent rate
ARPEGGIO SHUFFLE:
Arpeggio shuffle rate
ARPEGGIO OCT UP:
The range in which the arpeggio is
sounded will rise in steps of an octave.
ARPEGGIO OCT DOWN:
The range in which the arpeggio is
sounded will lower in steps of an octave.
*
If the system setting
the system setting will be used. If this is “TEMP,” the setting of the
live set or studio set will be used.
Knob/Slider
Fantom-G_r_e.book 293 ページ ２００９年７月２日 木曜日 午後２時５５分
