29
Installing & Setting Up the Driver (Macintosh)
Español
Italiano
Français
Deutsch
English
■
FreeMIDI settings
1
Use the
USB cable
to connect the
PCR-30/50/80
to your
computer
.
1.
With the power switch turned
OFF
, connect the
AC adaptor
to the
PCR-30/50/80
.
2.
Connect the
AC adaptor
to an electrical outlet.
3.
Use the
USB cable
to connect the
PCR-30/50/80
to your
computer
.
2
Set the PCR-30/50/80’s
power switch
to the
ON
position.
3
From the CD-ROM, copy the
Driver E (Mac OS 9, 8) – FreeMIDI Setting
folder onto the hard disk of your Macintosh.
4
Open the
FreeMIDI Applications
folder from the location into which you
installed FreeMIDI, and double-click the
FreeMIDI Setup
icon to start it up.
5
The first time you start up, use the following procedure.
1.
A dialog box saying
“Welcome to FreeMIDI!”
will appear.
Click
[Continue]
.
2.
When the
FreeMIDI Preferences
dialog box appear.
Click
[Cancel]
.
3.
The
About Quick Setup
dialog box will appear.
Click
[Cancel].
6
From the
File
menu, choose
Open
.
7
Select
PCR
from the
FreeMIDI
Setting
folder you copied in
step 3
, and
click
[Open]
.
8
Verify that MIDI transmission and reception occur correctly.
From the
MIDI
menu, choose
Check Connections
.
This unit is equipped with
a protection circuit. A brief
interval (a few seconds)
after power up is required
before the unit will operate
normally.
Once the connections have
been completed, turn on
power to your various
devices in the order
specified. By turning on
devices in the wrong
order, you risk causing
malfunction and/or
damage to speakers
and other devices.
When
“OMS is installed
on this computer...”
appears, click
[FreeMIDI]
.
If you are unable to select
Open
, make settings as
follows.
1.
From the
File
menu,
choose
FreeMIDI
Preference
.
2.
Uncheck
“Use OMS
when available.”
3.
Close FreeMIDI.
4.
Return to step 4 and
continue the procedure.
Summary of Contents for Edirol PCR-80
Page 124: ...124 MEMO ...
