Roland Edirol PCR-80 Owner'S Manual Download

Page: 149 / 184

149

Edit mode (EDIT)

OMNI

If you turn the Omni setting ON, all messages will be transmitted on the current channel (p. 118)
regardless of the channel that is specified for each controller.
Also, all messages will be transmitted to the

“KEYBOARD PORT SET”

(p. 154) regardless of

the port that is specified for each controller.

fig.edt

Press the

[EDIT]

button.

The display will indicate “EDT”.

Press the

[OMNI]

key.

fig.omn

The display will blink “OMN”.

Confirm what’s indicated and press the

[ENTER]

button.

The display will show the current setting.

Use the

[DEC] [INC]

buttons or the

[0]

[1]

keys to select the mode.

Press the

[ENTER]

button.

OMNI OFF

Messages will be transmitted on the channel and port
specified for each controller.

OMNI ON

Messages will be transmitted on the current channel
from the Keyboard Port, regardless of the channel
and port specified for each controller.

Summary of Contents for Edirol PCR-80

























































































































































































Search results

Summary of Contents for Edirol PCR-80

Reviews:

Related manuals for Edirol PCR-80

Brands by name

Popular brands

Roland Edirol PCR-80, Owner'S Manual

Search results

Summary of Contents for Edirol PCR-80

Reviews:

Related manuals for Edirol PCR-80

Brands by name

Popular brands