27
DR-880
12-2. Check the residual noise of
“MASTER OUT” L (MONO)/R.
Listen to the noise, and verify the following.
1.
Noise level: -73 dBu or less (both L and R)
2.
No abnormal sound is present in the output.
3.
No abnormal sound is produced when you apply physical shock to the
unit.
12-3. Check the residual noise of
“MASTER OUT” (PIN).
Listen to the noise, and verify the following.
1.
Noise level: -82 dBu or less (both L and R)
2.
No abnormal sound is present in the output.
3.
No abnormal sound is produced when you apply physical shock to the
unit.
12-4. Check the residual noise of
“INDIVIDUAL.”
Listen to the noise, and verify the following.
1.
Noise level: -77.5 dBu or less (both L and R)
2.
No abnormal sound is present in the output.
3.
No abnormal sound is produced when you apply physical shock to the
unit.
12-5. Check the residual noise of
“PHONES.”
Listen to the noise, and verify the following.
1.
Noise level: -72 dBu or less (both L and R)
2.
No abnormal sound is present in the output.
3.
No abnormal sound is produced when you apply physical shock to the
unit.
12-6. Check the residual noise of
“MASTER OUT” L (MONO)/R at the Hi-
Gain setting. (INPUT residual noise
check)
Press [BANK] to select “Hi-Gain.”
fig.inputadcheck4.eps
Listen to the noise, and verify the following.
1.
Noise level: -70 dBu or less (both L and R)
2.
No abnormal sound is present in the output.
3.
No abnormal sound is produced when you apply physical shock to the
unit.
13. Turn off the power.
Summary of Contents for DR-880
