Roland DP603, Owner'S Manual

Page: 16 / 34

14
Advanced Operation
Copying a Saved Song (Copy Song)
Songs that have been saved in internal memory can be copied to
USB flash drive. Alternatively, songs stored on a USB flash drive can
be copied to internal memory.
* Audio files cannot be copied.
* If a USB flash drive is not connected, you won’t be able to perform
this operation.
1.
Press the [Ambience] button and [Brilliance] button
simultaneously.
2.
Use the [
K
] [
J
] buttons to select “Copy Song,” and then
press the [
s
] (Enter) button.
The Copy Song screen appears.
3.
Use the [–] [+] buttons to select the copy-source and copy-
destination memory locations (internal memory or USB
flash drive).
4.
Press the [
J
] button.
5.
Use the [–] [+] buttons to select the song that you want to
copy.
If you decide to cancel, press the [
u
] (Exit) button.
6.
Press the [
s
] (Enter) button.
The copy is executed.
NOTE
Never turn off the power or disconnect the USB flash drive while
the screen indicates “Executing...”
7.
Simultaneously press the [Ambience] button and
[Brilliance] button to exit Function mode.
Deleting a Saved Song (Delete Song)
Here’s how to delete a song that you saved on an internal memory or
USB flash drive.
MEMO
If you want to delete all songs that have been saved to internal
memory, initialize the memory.
* If you want to delete a song on the USB flash drive, connect your
USB flash drive to the USB Memory port before you continue.
1.
Press the [Ambience] button and [Brilliance] button
simultaneously.
2.
Use the [
K
] [
J
] buttons to select “Delete Song,” and then
press the [
s
] (Enter) button.
The Delete Song screen appears.
3.
Use the [–] [+] buttons to select the memory location
(internal memory or USB flash drive) that contains the song
you want to delete.
4.
Press the [
J
] button.
5.
Use the [–] [+] buttons to select the song that you want to
delete.
6.
Press the [
s
] (Enter) button.
A confirmation message appears.
If you decide to cancel, press the [
u
] (Exit) button.
7.
Use the [
J
] button to select “Yes,” and then press the [
s
]
(Enter) button.
The deletion is executed.
NOTE
Never turn off the power or disconnect the USB flash drive while
the screen indicates “Executing...”
8.
Simultaneously press the [Ambience] button and
[Brilliance] button to exit Function mode.