3
IMPORTANT NOTES
291a
In addition to the items listed under “USING THE UNIT SAFELY” on page 2–3, please read and observe the
following:
Placement
354b
• Do not expose the unit to direct sunlight, place it
near devices that radiate heat, leave it inside an
enclosed vehicle, or otherwise subject it to temper-
ature extremes. Also, do not allow lighting devices
that normally are used while their light source is
very close to the unit (such as a piano light), or
powerful spotlights to shine upon the same area of
the unit for extended periods of time. Excessive heat
can deform or discolor the unit.
355b
• When moved from one location to another where the
temperature and/or humidity is very different, water
droplets (condensation) may form inside the unit.
Damage or malfunction may result if you attempt to
use the unit in this condition. Therefore, before using
the unit, you must allow it to stand for several hours,
until the condensation has completely evaporated.
356
• Do not allow rubber, vinyl, or similar materials to
remain on the unit for long periods of time. Such objects
can discolor or otherwise harmfully affect the finish.
Maintenance
401a
• For everyday cleaning wipe the unit with a soft, dry
cloth or one that has been slightly dampened with
water. To remove stubborn dirt, use a cloth impreg-
nated with a mild, non-abrasive detergent. After-
wards, be sure to wipe the unit thoroughly with a
soft, dry cloth.
402
• Never use benzine, thinners, alcohol or solvents of
any kind, to avoid the possibility of discoloration
and/or deformation.
Additional Precautions
553
• Use a reasonable amount of care when using the
unit’s buttons, sliders, or other controls; and when
using its jacks and connectors. Rough handling can
lead to malfunctions.
556
• When connecting / disconnecting all cables, grasp
the connector itself—never pull on the cable. This
way you will avoid causing shorts, or damage to
the cable’s internal elements.
558d
• This instrument is designed to minimize the
extraneous sounds produced when it’s played.
However, since sound vibrations can be transmitted
through floors and walls to a greater degree than
expected, take care not to allow these sounds to
become a nuisance to neighbors, especially when
performing at night and when using headphones.
add
• The rubber portion of the striking surface is treated
with a preservative to maintain its performance.
With the passage of time, this preservative may
appear on the surface as a white stain, or reveal
how the pads were struck during product testing.
This does not affect the performance or
functionality of the product, and you may continue
using it with confidence.
104
• Try to prevent cords and cables from
becoming entangled. Also, all cords and
cables should be placed so they are out of the
reach of children.
................................................................................................
106
• Never climb on top of, nor place heavy
objects on the unit.
................................................................................................
118
• Should you remove nuts, washers, screws,
anchor bolts, etc., make sure to put them in a
safe place out of children’s reach, so there is no
chance of them being swallowed accidentally.
................................................................................................
PD/CY/KD/FD-8_e 3 ページ ２００７年７月２０日 金曜日 午前９時４５分
