background image

2

USING THE UNIT SAFELY

 WARNING

Make sure that the power cord is grounded

Connect mains plug of this model to a 
mains socket outlet with a protective 
earthing connection.

To completely turn off power to the unit, pull out 

the plug from the outlet

Even with the power switch turned off, this 
unit is not completely separated from its 
main source of power. When the power 
needs to be completely turned off, turn off 
the power switch on the unit, then pull out the plug 
from the outlet. For this reason, the outlet into which 
you choose to connect the power cord’s plug should 
be one that is within easy reach and readily accessible.

Do not disassemble or modify by yourself

Do not carry out anything unless you are 
instructed to do so in the owner’s manual. 
Otherwise, you risk causing malfunction.

Do not repair or replace parts by yourself

Refer all servicing to your retailer, the 
nearest Roland Service Center, or an 
authorized Roland distributor, as listed on 
the “Information.”

Do not use or store in the following types of 

locations

•  Subject to temperature extremes (e.g., 

direct sunlight in an enclosed vehicle, 
near a heating duct, on top of heat-
generating equipment); or are

•  Damp (e.g., baths, washrooms, on wet 

floors); or are

•  Exposed to steam or smoke; or are
•  Subject to salt exposure; or are
•  Exposed to rain; or are
•  Dusty or sandy; or are
•  Subject to high levels of vibration and shakiness.

Use only the stand that is recommended

This unit should be used only with a stand 
that is recommended by Roland.

Do not place in a location that is unstable

When using the unit with a stand 
recommended by Roland, the stand must 
be carefully placed so it is level and sure 
to remain stable. If not using a stand, you 
still need to make sure that any location you choose 
for placing the unit provides a level surface that will 
properly support the unit, and keep it from wobbling.

 WARNING

Precautions regarding placement of this unit on a 

stand

Be sure to follow the instructions in the 
Owner’s Manual carefully when placing this 
unit on a stand (p. 10).
If it is not set up properly, you risk creating 
an unstable situation which could lead to the unit 
falling or the stand toppling, and may result in injury.

Use only the supplied AC adaptor and the correct 

voltage

Be sure to use only the AC adaptor supplied 
with the unit. Also, make sure the line 
voltage at the installation matches the 
input voltage specified on the AC adaptor’s 
body. Other AC adaptors may use a different polarity, 
or be designed for a different voltage, so their use 
could result in damage, malfunction, or electric shock.

Use only the supplied power cord

Use only the attached power cord. Also, the 
supplied power cord must not be used with 
any other device.

Do not bend the power cord or place 

heavy objects on it

Otherwise, fire or electric shock may result.

Avoid extended use at high volume

Use of the unit at high volume for extended 
periods of time may cause hearing loss. If 
you ever experience any hearing loss or 
ringing in the ears, you should immediately 
stop using the unit and consult a specialized 
physician.

Do not allow foreign objects or liquids to enter 

unit; never place containers with liquid on unit

Do not place containers containing liquid 
(e.g., flower vases) on this product. Never 
allow foreign objects (e.g., flammable 
objects, coins, wires) or liquids (e.g., water 
or juice) to enter this product. Doing so 
may cause short circuits, faulty operation, 
or other malfunctions.

 WARNING

Turn off the unit if an abnormality or malfunction 

occurs

Immediately turn the unit off, remove the 
AC adaptor from the outlet, and request 
servicing by your retailer, the nearest 
Roland Service Center, or an authorized 
Roland distributor, as listed on the “Information” when:

•  The AC adaptor or the power cord has been 

damaged; or

•  If smoke or unusual odor occurs; or
•  Objects have fallen into, or liquid has been spilled 

onto the unit; or

•  The unit has been exposed to rain (or otherwise 

has become wet); or

•  The unit does not appear to operate normally or 

exhibits a marked change in performance.

Be cautious to protect children from injury

Always make sure that an adult is on hand 
to provide supervision and guidance when 
using the unit in places where children 
are present, or when a child will be using 
the unit.

Do not drop or subject to strong impact

Otherwise, you risk causing damage or 
malfunction.

Do not share an outlet with an unreasonable 

number of other devices

Otherwise, you risk overheating or fire.

Do not use overseas

Before using the unit in overseas, consult 
with your retailer, the nearest Roland 
Service Center, or an authorized Roland 
distributor, as listed on the “Information.”

Handle batteries carefully

If used improperly, you risk the dangers of 
fluid leakage, overheating, combustion, 
explosion, etc. Carefully observe the 
following:

•  Do not heat, disassemble, or toss them 

into a fire or water.

•  Do not expose them to sunlight, flame, 

or any other source of extreme heat.

•  Do not attempt to charge a dry cell 

battery.

•  When using a rechargeable battery and 

a charger, make sure to use only the 
combination of rechargeable battery 
and charger that has been specified 
by the battery manufacturer. Also, 
be sure to read all of the precautions 
that were supplied with the rechargeable battery 
and charger, and abide by them when using the 
battery/charger.

Used for instructions intended to alert the 
user to the risk of injury or material 
damage should the unit be used 
improperly. 
* Material damage refers to damage or 

other adverse effects caused with 
respect to the home and all its 
furnishings, as well to domestic animals 
or pets. 

Used for instructions intended to alert the 
user to the risk of death or severe injury 
should the unit be used improperly. 

The       symbol alerts the user to things that must be 
carried out. The specific thing that must be done is 
indicated by the design contained within the circle. In the 
case of the symbol at left, it means that the power-cord 
plug must be unplugged from the outlet. 

The       symbol alerts the user to important instructions or 
warnings.The specific meaning of the symbol is 
determined by the design contained within the triangle. In 
the case of the symbol at left, it is used for general 
cautions, warnings, or alerts to danger. 

The       symbol alerts the user to items that must never be 
carried out (are forbidden). The specific thing that must 
not be done is indicated by the design contained within 
the circle. In the case of the symbol at left, it means that 
the unit must never be disassembled. 

About       WARNING and       CAUTION Notices

About the Symbols

ALWAYS OBSERVE THE FOLLOWING

Summary of Contents for CUBE Street EX

















Reviews: