68
Convenient Functions for Recording
(continued)
You can sound a count before recording begins. Hearing a count can help you practice
the timing or tempo of your performance before you actually start recording.
1
Press the [
] (Metronome) button to turn on the metronome.
fig.countin01-e.eps
2
Specify the sound, tempo, and time signature of the count.
The sound, tempo, and time signature of the count will be the same as specified by the
metronome settings. For details, refer to Steps 2–4 of “Sounding the Metronome” (Page
81).
3
Press the [MENU] button to access the menu screen, and choose “Count-
in (Beat).”
fig.menu-countin01-e.eps
Press the [MENU] button to access the menu screen.
Use the [
] [
] buttons to choose “Count-in
(Beat).”
Press the [ENTER] button to confirm your choice.
4
Use the [+] [-] buttons to adjust the value that specifies how many count
notes will be sounded before recording begins.
fig.menu-countin02-e.eps
5
Press the [EXIT] button twice.
You’re returned to the audio source screen.
Inserting a Count Before Recording Begins (Count-in)
Value
Explanation
Off (factory setting)
No count-in will sound.
1–16
The specified number of count-in beats will sound.
Lit
CD-2u_SD-2u_e.book 68 ページ ２０１３年１月２４日 木曜日 午前１１時３４分
