81
Advanced Uses
Recording
Listening
Deleting
Creating a CD
Editing an SD
Appendices
Convenient
Functions
Information
/
Display
Checkin
g
/
Preparations
Sounding the Metronome
The CD-2u/SD-2u has built-in metronome—a convenient feature for practicing an instrument.
1
Press the [
] (Metronome) button to turn the metronome on.
The setting will turn on/off each time you press the[
] (Metronome) button.
* Whenever the unit has remained inactive for a predetermined amount of time, it will go back to
displaying the Source (Sound Source) screen.
fig.metro-indicator-e.eps
If the metronome is on, the [
] (Metronome) button will light. At the same time, the
metronome’s indicator will start blinking on the beat.
When you press the [
] (Metronome) button once again, the metronome will turn off
(unlit).
2
Setting the sound.
fig.menu-metro01-e.eps
Press the [
] (
Metronome)
button to access the
menu screen.
Use the [
] buttons to choose “Sound.”
Use the [+] [-] buttons to select the desired metronome
sound.
3
Setting the tempo.
fig.menu-metro03-e.eps
Use the [
] [
] buttons to choose “Tempo.”
Specify the tempo of the metronome.
•Use the [+] [-] buttons to change the tempo value.
•Specify the desired tempo by tapping it out using
the [ENTER] button.
Value
Explanation
Silent
There will be no sound; the metronome indicator will blink to mark the
beats.
Bell (factory setting)
A bell will mark the beats.
Click
An electronic sound will mark the beats.
Voice
A human voice (English) will count the beats
Value
Explanation
=20–120 (factory setting)–250
Specifies the number of quarter-notes in one minute.
Decreasing this value will make the tempo slower. Increasing
this value will make the tempo faster.
Metronome indicator (blinking)
Red: strong beats
Green: weak beats
CD-2u_SD-2u_e.book 81 ページ ２０１３年１月２４日 木曜日 午前１１時３４分
