18
3 Replacement of Main Parts
3
1
2
Put the 0.25 mm ink pen to the PEN CARRIAGE
ASSEMBLY and push it down with your finger at the
positions shown in the figure. Make sure that the pen tip
lands /- 0.5 mm from the center of the CUTTER
PROTECTION. If not, fix the PEN CARRIAGE ASSEMBLY
again.
Make sure there is no looseness in the PEN CARRIAGE
ASSEMBLY when fixing it to the GUIDE RAIL.
3-1 PEN CARRIAGE ASSEMBLY_FIXING
PEN CARRIAGE
ASSEMBLY
CUTTER
PROTECTION
GUIDE RAIL
