22
Installing the ARX Expansion Board
Install the Expansion Board after removing the panel cover.
1.
Before installing the Expansion Board, turn off the power of the VS-700R and all connected
devices, and disconnect all cables, including the Power cable, from the VS-700R.
2.
From the VS-700R, remove only the screws shown in the following diagram, and detach the cover.
VS-700R Top Panel
fig.exp02.eps
3.
Orient the board with the slot of the VS-700R as shown in the illustration.
fig.attach01.eps
How to Install an Expansion Board
Slot of the VS-700R
Board
(expansion board)
Non-latched holders
Latched holders
Roland logo
Holes that engage the
non-latched holders
VS-700R_e1.book 22 ページ ２０１０年６月１５日 火曜日 午後４時５９分
