Roland Cakewalk A-500S Owner'S Manual Download

Page: 65 / 80

Troubleshooting

Could the A-500S be in use by other software?

Close all software you currently have running. Next, switch off the A-500S’s power, then turn it back on again.

If this does not solve the problem, reinstall the driver.

➝

“Reinstalling the driver”

(p. 54)

Is the driver installed correctly?

Driver installation may have failed. Please reinstall the driver.

➝

“Reinstalling the driver”

(p. 54)

Is the A-500S device name shown?

If the device name is not displayed, it may be that the driver installation failed. Please reinstall the driver.

➝

“Reinstalling the driver”

(p. 54)

Could the computer to which the A-500S is connected have entered standby (suspend) mode, hibernate
mode, or sleep mode?

Close all software that’s using the A-500S. Next, switch off the A-500S’s power, then turn it back on again.

If this does not solve the problem, restart your computer.

Could you have disconnected and reconnected the USB cable while using the A-500S?

Close all software that’s using the A-500S. Next, switch off the A-500S’s power, then turn it back on again.

If this does not solve the problem, restart your computer.

Could the A-500S have been connected when the computer started up?

On some computers, the A-500S may be unusable if it is already connected when the computer starts up.

Start up your computer, and then connect the A-500S.

Are you using the Media Player included with Windows?

On Windows 7 or Windows Vista, the A-500S’s MIDI device cannot be selected by Media Player.

Problems with settings

Can’t select/use the A-500S within software or in system settings

A-500S_e.book 65 ページ２０１０年２月１９日　金曜日　午後８時３分

Summary of Contents for Cakewalk A-500S

















































































Search results

Summary of Contents for Cakewalk A-500S

Reviews:

Related manuals for Cakewalk A-500S

Brands by name

Popular brands

Roland Cakewalk A-500S, Owner'S Manual

Search results

Summary of Contents for Cakewalk A-500S

Reviews:

Related manuals for Cakewalk A-500S

Brands by name

Popular brands