2.1 Connecting the adapter
Note: To prevent malfunction and/or damage to speakers
or other devices, always turn down the volume, and turn
off the power of all devices before making any connections.
1.
Connect the supplied ACJ adapter to the DC IN
jack on the rear panel of the C-180.
2.
Connect the other end to an AC outlet.
2.2 Turning the power on and off
Your C-180 is fitted with an amplifier and speakers so
that you do not need additional devices.
1.
Turn the volume all the way down.
2.
Press the [POWER] switch on the rear panel to
turn on the power.
Press at least one tab, because all sounds will be off
immediately after switching on the C-180. Adjust the
volume to your liking.
Note: Your C-180 is equipped with a protection circuit. A
brief interval after power up is required before it will oper-
ate normally.
Turning off the power
1.
Set the [VOLUME] slider to the minimum posi-
tion.
2.
Press the [POWER] switch to turn off the power.
2.3 Adjusting the volume
The C-180 features two volume sliders. The [VOL-
UME] slider is used to change the global volume,
while the [BASS] slider allows you to set the level of
the bass sounds with respect to the organ or orches-
tral sounds.
2.4 Connecting headphones (sold
separately)
The C-180 features two headphone jacks. This allows
two people to listen through headphones simultane-
ously, making it very useful for lessons. Additionally,
this allows you to play without having to worry about
bothering others around you, even at night.
1.
Turn the volume all the way down.
2.
Plug a pair of headphones (Roland RH-25, RH-50)
into a PHONES jack on the lower-left panel of the
C-180.
3.
Adjust the volume.
By connecting headphones to the C-180, you switch
off its speakers, which is ideal for playing or practising
without disturbing others.
Note: Be sure to use stereo headphones.
Precautions to take when using headphones
To avoid damaging or severing the headphone cord,
be sure to handle the headphones by holding the
phones themselves, and grasping the plug rather than
the cord when pulling the headphone plug.
• Connecting the headphones when the volume of con-
nected equipment is turned up may result in damage
to the headphones. Connect the headphones only
after turning the volume down completely.
Global volume (all
sections)
Volume of the
bass tone
VOLUME
BASS
7
C-180
2. Getting started
ENGLISH
