Roland BK-5 Owner'S Manual Download | Manualshive

Page: 55 / 152

background image

Menu options

Backing Keyboard BK-5

r

55

15.

Menu options

The BK-5’s [MENU] button provides access to the available parameters and functions.

General procedure

1.

Press the [MENU] button (its indicator
lights).

The display changes to:

2.

Rotate the [CURSOR

÷

VALUE] dial to select

the desired function group.

The following function groups are available:

3.

Press the [ENTER/SELECT] button to go to
the display page where you can edit the
parameters of the selected group, or to exe-
cute the selected command.

Internal Lyrics

The BK-5’s display can show the lyrics of Standard MIDI
Files or mp3 songs you load. If such song files contain
Lyrics data, the lyrics are always displayed on an exter-
nal screen you connect to the BK-5 (see “Connecting a
television set” on p. 18), unless you set the “External Lyr-
ics” parameter to “Off” (see below).

Sometimes, however, it may be wiser to orient the exter-
nal screen in such a way that the audience can easily
follow the lyrics, which may then mean that you no
longer see what is displayed. If you need to see the lyr-
ics, you can follow them on the BK-5’s internal display:

1.

Load a song with lyrics data (see p. 35).

2.

Select the “Internal Lyrics” command (see
“General procedure”).

3.

Press the [ENTER/SELECT] button.

Function group

Explanation

Internal Lyrics

Allows you to activate the display of
lyrics data on the BK-5 itself. (Only for
SMF and mp3 files for which there are
lyrics data.)

External Lyrics

Allows you to cancel (“Off”) or activate
(“On”) the display of song lyrics on an
external screen.

Performance
Edit

This function group allows you to
select different Tones and effects set-
tings for the keyboard parts, the
selected rhythm, to set the Arranger’s
behavior, the split point, etc. All set-
tings of this group can be saved to a
Performance memory. See “‘Perfor-
mance Edit’ parameters” on p. 56.

Global

This function group contains parame-
ters that apply to all sections of the
BK-5 (see p. 65).

One Touch Edit

This functions allows you to edit the
ONE TOUCH memories (and to save
your changes).

Mastering Tools

These functions allow you to set the
global compressor and equalizer (see
p. 71).

Makeup Tools

These functions allow you to edit the
selected rhythm or SMF song in an
intuitive way, without caring too much
about the underlying MIDI parameters.
See page 74.

Rhythm
Composer

This function group allows you to cre-
ate new rhythms or to edit existing
ones.

MIDI

This function group allows you to edit
the BK-5’s MIDI parameters (see
p. 102).

Factory Reset

This command allows you to load the
BK-5’s factory settings (see p. 111).

Format USB
Device

This command allows you to format an
optional USB memory (see p. 111).

Function group

Explanation

BK-5_US.book Page 55 Monday, November 14, 2011 12:43 PM

«
...
53
54
55
56
57
...
»

Summary of Contents for BK-5

























































































































































Reviews:

No comments

Related manuals for BK-5

Brand: Epomaker Pages: 24

Brand: Alienware Pages: 13

Brand: cefar Pages: 148

Brand: Saab Pages: 9

Brand: ZoomText Pages: 48

Brand: Toyota Pages: 11

Brand: Casio Pages: 74

Brand: BOW Pages: 4

Brand: ARMOUR Pages: 7

BENTLEY 2012 TD

Brand: KAP Pages: 31

M2ME IoT Sensor

Brand: 360VRFit Pages: 2

Brand: Trust Pages: 9

EASY SCROLL SILVERLINE

Brand: Trust Pages: 10

Brand: Genesis Pages: 8

Brand: Genesis Pages: 10

Brand: Totally Wicked Pages: 2

LED Tail Lights LAT-NR140

Brand: Dakota Digital Pages: 2

Brand: E.L.B. Pages: 14

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands