Roland AT900 Music Atelier Owner'S Manual Download | Manualshive

Page: 90 / 300

background image

88

Using Rhythm Performance

If an intro is played before your performance, you can have a countdown
played to the end of the intro, allowing you to understand easily where you
are to start playing.

fig.02-05_AT-900.eps

1.

Press the [Count Down] button, getting the indicator to light.

2.

Press the [Intro] button.

3.

Press the [Start/Stop] button.

The intro plays, and a countdown plays to the end of the intro.

When the [Sync Start] button is lit, specifying the chord on the Lower keyboard
starts the intro, and again, a countdown is given.

4.

To stop the countdown, press the [Count Down] button,
turning off the indicator light.

The Arranger function of the ATELIER can add an Automatic Accompaniment
to each Rhythm. Based on the selected Rhythm, the Arranger function
automatically adds an accompaniment that is suitable for the chord being
pressed on the Lower keyboard.

fig.02-06.eps

1.

Press the Arranger [On/Off] button (indicator lights.)

2.

Start the rhythm (p. 85).

The rhythm and the automatic accompaniment will play together.

If the Arranger [On/Off] button is ON and no Pedal Bass voice is selected,
the Automatic Accompaniment will play the bass sound.

Playing the Count Sound at the End of the Intro

Playing Rhythm and Automatic Accompaniment

Arranger [On/Off] button

Function

Lit

Rhythm and Automatic Accompaniment

Unlit

Rhythm

You can change the countdown
sound (p. 214).

NOTE

When the Arranger [On/Off]
button is on, Sync Start (p. 86)
on the pedalboard cannot be
used.

NOTE

The lower voice is not played
during the performance of the
intro and ending, even when
the Lower keyboard is played.

AT-900_e.book 88 ページ２００７年９月７日　金曜日　午前８時４３分

«
...
88
89
90
91
92
...
»

Summary of Contents for AT900 Music Atelier













































































































































































































































































































Reviews:

No comments

Related manuals for AT900 Music Atelier

Brand: Garmin Pages: 14

Brand: Garmin Pages: 14

Brand: Zagg Pages: 20

Brand: Roccat Pages: 2

Brand: Parkeon Pages: 43

RUDDER ANGLE INDICATOR

Brand: VDO Pages: 8

Brand: Matrix Pages: 12

Brand: Epomaker Pages: 24

Brand: Zenoah Pages: 42

Brand: Ttesports Pages: 78

Brand: Ploom TECH+ Pages: 48

Brand: Infinite Response Pages: 96

Brand: Kenwood Pages: 6

Brand: Sony Pages: 14

Brand: Zoom Pages: 6

Brand: Techly Pages: 2

Brand: Beurer Pages: 40

Deutsch/Englisch Professor DBD-440

Brand: Franklin Pages: 18

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands