Roland AT900 Music Atelier, Owner'S Manual

Page: 87 / 300

85
Using Rhythm Performance
Using Rhythm Performance
There are two ways to start the rhythm. You can press the [Start/Stop] button
to start the rhythm, or you can use Synchro Start to have the rhythm start when
you play the lower keyboard or the pedal keyboard.
You can also make the rhythm start with an intro, or stop with an ending.
fig.02-03_AT-900.eps
Starting with an Added Intro
1.
Press the [Intro] button.
2.
Press the [Start/Stop] button.
The Intro is played and the Rhythm starts.
While the Intro is playing, the [Intro] button indicator will light, until the Intro
ends then the button indicator will go dark.
Starting Without an Intro
1.
Press the [Start/Stop] button.
The Rhythm starts without an Intro being played.
Making the Intro Short and Simple
1.
Press the Variation [1] button.
2.
Press the [Intro] button.
3.
Press the [Start/Stop] button.
A short Intro is played and the Rhythm starts.
Playing Rhythm
Starting at the Press of a Button
The functions of the [Intro]
button, [Ending] button and
[Start/Stop] button can be
assigned to the foot switches
located on each side of the
Expression Pedal (p. 134).
You can change the operation
of the Fill In [Auto] button,
[Break] button, [Intro] button,
and [Ending] button (p. 215).
For more on the Variation
buttons, refer to “Adding
Variety to the Rhythm or
Automatic Accompaniment” (p.
89).
AT-900_e.book 85 ページ ２００７年９月７日 金曜日 午前８時４３分