Roland Aproll MDX-540 User Manual Download

Page: 29 / 120

1-2 Part Names and Functions

VPanel

Operation of the machine is controlled from the screen of your computer. VPanel is a dedicated program for controlling the
machine.

Note: The information displayed may vary depending on what optional devices are installed.

Menu icons

You choose which item you
want to control by clicking
one of these icons.

This displays the status of
the machine. When an error
occurs, a description of the
error is displayed.

This displays the installation
status of optional equipment
and the like.

This displays the cutting time.
It is reset when the next cut-
ting operation starts.

This displays the present tool
location.

This displays the present
rotating speed of the spindle.
Changing the speed is also
possible.

This displays the present
feed rate.

This displays the present
spindle load.

Chapter 1 Introduction

Summary of Contents for Aproll MDX-540

























































































































Search results

Summary of Contents for Aproll MDX-540

Reviews:

Related manuals for Aproll MDX-540

Brands by name

Popular brands

Roland Aproll MDX-540, User Manual

Search results

Summary of Contents for Aproll MDX-540

Reviews:

Related manuals for Aproll MDX-540

Brands by name

Popular brands