46
Recording Acoustic Instruments or Vocals
(continued)
7
Press the [
](Record) button to enter recording-standby mode.
fig.rec-intmic04-e.eps
8
Press the [
](Play) button to begin recording.
Start your performance.
fig.rec-intmic05-e.eps
9
Press the [
](Stop) button to stop recording.
fig.rec-intmic06-e.eps
The recorded song will be added to the end of the SD memory card or CD-R/RW disc.
If you want to listen to the song you recorded, press the [
](Play) button
immediately after you stop recording.
Blinking
Remote control
Lit
Remote control
Remote control
●
Sound will not be produced from the speakers while in recording-standby mode or while
recording. If you want to listen to the sound that’s being recorded, you’ll need to use
headphones. (Refer to Step 4 on Page 40.)
●
If you hear acoustic feedback (a squealing sound) while using the mic, try changing the
direction of the mic, moving it away from the speakers, or lowering the volume.
●
When turning the [MIC] knob, you may hear a faint noise when the input level changes,
but this is not a malfunction.
●
If you’ve finished recording a CD-R/RW disc and would like to play that disc on another
CD player, you’ll need to execute the “Finalize” operation. You can finalize the CD-R/RW
disc when ejecting it. For details, refer to “Making a CD-R/RW Disc for Playback on
Another CD Player (Finalize)” (Page 102).
Important
CD-2i_e.book 46 ページ 2010年3月15日 月曜日 午前10時15分