13
1. Take the left-hand wheel in both hands. Press the button in the centre of the hub axle with your
thumb. Make sure that the metal washer is correctly positioned.
2. Push the wheel‘s clevis axle into the left-hand axle mount on the base plate as far as it will go.
Release your thumb from the button on the middle of the hub axle. The clevis axle must audibly
click into place.
3. Repeat this process for the right-hand wheel.
4. Then press the black protective rubber caps onto the hubs.
The tow arm supplied fits into the tow arm mount on the left-hand side
(when hitching to a bicycle) and the tow arm mount in the middle of the
trailer (when using the trailer as a handcart).
The tow arm will be difficult to insert into the tow arm mount
at first. This improves after repeated use. You can spray the
end of the tow arm with a little silicone spray to make it easier
to insert.
Use silicone spray only, and do not use too much spray. This can attract dust and grains of sand
and cause damage to the guide rails.
Base plate overhead view in
direction of travel
Press
Press
Check that both wheels are securely in place.
To remove, press the button in the centre of the hub axle and pull off the wheel. Ensure the trailer is
unladen before removing the wheels.
9.5 Fitting the tow arm to the coupling system
Quick-release clamp
Tow arm
