Cequent Performance Products, Inc.
Plymouth, MI 48170
Technical Service: (888) 521-0510
59798N Rev D 5-26-15
Attach (4) L-Brackets to truck rack crossbars:
•
Remove locking end caps from crossbars.
•
Select location of L-Brackets and plastic adapters.
Note, DO NOT extend plastic adapters past ends of
crossbars.
•
Trim buffer strip to clear T-Bolts.
Note, the buffer strips tuck under the plastic adapters.
•
Install T-Bolts into crossbar channels
•
Install plastic adapter & L-Brackets onto T-Bolts and
loosely install the 5/16 locknuts onto T-Bolts.
2
L-BRACKET
5/16-18 T-BOLT
5/16-18
LOCK NUT
PLASTIC ADAPTER
TRIM BUFFER
STRIP
LOCKING
END CAP
Please read all instructions carefully before assembly, installation and/or use of this product.
59798
TOP RAIL KIT
Printed in China
Page 4 of 6
NOTE: L-Brackets can be mounted inboard or outboard
of side rails to best suit use.
Product Code:
Product Name:
3
Attach Side Rail Assemblies to Truck Rack:
•
Place the assembled side rails on to the plastic adapters,
against the L-Brackets.
•
Secure side rails to L-Brackets using (1) Clamp Bracket,
(2) ¼-20 x .750 long hex bolts and (2) lock washers,
4 places.
•
Install (2) #8 self tapping screws into the side rails as shown.
(optional)
•
Adjust side rails to desired width and firmly tighten
all (4) 5/16 locknuts
¼-20 X ¾” HEX BOLT
¼” LOCK WASHER
#8 x 5/8” TAPPING SCREW
CLAMP BRACKET
TIGHTEN 5/16-18
LOCK NUT
(4) PLACES
ROLA LOGO LABEL
FACING OUTWARD
