ALL DESIGN CONCEPTS ARE INTELLECTUAL PROPERTY OF ROLACASE AND ARE NOT TO BE COPIED, DISTRIBUTED OR COMMUNICATED TO UNAUTHORISED PARTIES
FOR TECHNICAL SUPPORT CALL: 1 (857) 334 0300 / E-MAIL: [email protected] / WEB: www.rolacase.com
ATTENTION: PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLING/INSTALLING THIS PRODUCT
ANY ALTERATIONS, UNINTENDED OR UNAPPROVED WORK/USE OF THIS PRODUCT COULD CREATE A
HAZARDOUS CONDITION THAT CAN CAUSE DEATH, PERSONAL INJURY OR PROPERTY DAMAGE.
WARNING
ATTENTION
IMAGES USED IN THIS GUIDE MAY VARY SLIGHTLY DEPENDING ON YOUR MODEL
BEFORE YOU BEGIN:
• THE AVERAGE EXPECTED INSTALL TIME FOR THIS PRODUCT IS 15 MINUTES
• READ ALL THE INSTRUCTIONS BEFORE ASSEMBLY & INSTALLATION
• ENSURE YOU HAVE SOME ASSISTANCE FROM A SECOND PERSON TO AVOID VEHICLE
DAMAGE OR ANY PERSONAL INJURY
• BE AWARE ON THE LOCATION OF VEHICLE WIRING, GAS TANKS, GAS LINES, BRAKE
LINES, & ANY OTHER IMPORTANT ITEMS
• ENSURE IT IS SAFE BEFORE DRILLING OR CUTTING ANYWHERE ON THE VEHICLE &
INSTALLING ANY OF OUR PRODUCTS
• CONFIRM YOU HAVE ALL THE NECESSARY PARTS, TOOLS, EQUIPMENT, & TIME
REQUIRED BEFORE COMMENCING
TOOLS REQUIRED:
Screw Drivers
Cordless Drill with
Torque settings
Rachet, sockets,
and/or spanners
RSCSBRPM118136159
Please note:
Deep
setbacks come in a
pair to suit left and
right sides
INSTALLATION MANUAL
RSCSBRPM118136159
(RolaCase Ram ProMaster Deep Setbacks)
PART No. RSCSBRPM118136159 suits our RSCGBRPM118136159
(sold
separately)
partition that fits the following vehicles:
• 2014-2021 RAM PROMASTER 1500 STD & HIGH ROOF, 118”,136” & 159” W/B
• 2014-2021 RAM PROMASTER 2500 STD & HIGH ROOF 136” & 159” W/B
• 2014-2021 RAM PROMASTER 3500 STD & HIGH ROOF 136” & 159” W/B
The RolaCase Ram ProMaster Deep Set-Back converts your default partition for an additional 2.5”in of cabin space which allows for a deeper seat recline and more storage
between the seats and the partition.
These deep setbacks are designed to complement the Rolacase Partition/Bulkhead for the Ram ProMaster (kit part#: RSCGBRPM118136159 -
sold separately
) below you can
see a composition for the Deep Setbacks and Partition
(sold separately)
Part #6 and #7 is simply substituted for this High Roof component using the same hardware and instructions provided in that kit. A recap of the original partition instructions
can be found on the next section.
A. R/H Standard Deep Setback
B. L/H Standard Deep Setback
B
A
DEEP SETBACKS PARTS
PARTITION PARTS - SOLD SEPARATELY
1.
Upper Cross Mount Beam
2. Upper Mid Roof Header Panel
3. Centre Panel
4. R/H side Panel
5. L/H side Panel
6. R/H standard shallow Setback
7.
L/H standard shallow Setback
8. Lower Brace
6
4
5
3
7
1
8
NOT VISIBLE can be
seen from cabin side
USE HARDWARE PROVIDED WITH PARTITION
RSCGBRPM118136159
SOLD SEPARATELY
