13
Wireless Network:
If you have an open and visible Wi-Fi network in your home (one which
broadcasts its name, and which has no security keys set) then SoundBridge will auto-connect
to your wireless network. However, you will be asked to enter your network’s name (SSID) if:
- SoundBridge detects more than one Wi-Fi network (as some advanced users have in their
home, or if your neighbor’s signal is leaking over), or
- Your Wi-Fi network does not broadcast its name (for security reasons)
In these cases, enter the SSID using the remote control. Use the left/right
◁
▷
arrows to choose
letters, and use the up/down
△
▽
arrows to change to Uppercase and to other character sets
(numbers, international characters) and to enter “Space”, “Delete” and “OK” when you’re done.
SoundBridge supports networks with WEP security. WPA is not yet supported. If you have a
WEP security key, you will need to enter your WEP key manually into SoundBridge. This is the
same key you have entered into your Access Point and your computer. Your screen will look
something like this:
No Music Libraries Found (Why?)
System Configuration
Scroll down using your remote control’s Down
▽
arrow until the option “System Configuration”
is highlighted, and press
Select [
4
]
on your remote control. You will see a screen that looks like
this:
Software Version & Updates
Select Wi-Fi SSID & Password
Show Wired Ethernet Status
Show Wi-Fi Status
Navigate down to “Select Wi-Fi SSID & Password” and enter your wireless network name and
password.
For additional help connecting to your network, including password help, see the Wi-Fi setup
section in the appendix of this guide.
1
Section 1:
Getting Started
