Rok 150-76-50479, Instruction Manual

Page: 4 / 8

4
DESCRIPTION
Your orbital sander has been designed for sanding applications.
1 ON/OFF Switch button
2 Lock button
3 Main handle
4 Dust bag
5 Hook and loop sanding plate
6 Front handle
Accessories supplied with the machine - 125mm 80grx1pc
OPERATING INSTRUCTIONS
Switching on and off

To switch on the machine press the on/off switch (1).

To switch off the machine, release the on/off switch (1).

To switch the machine to continuous mode, you keep the on/off switch (1) fully pressed and simultaneously press
the lock button (2). And subsequently release the on/off switch.

To switch off continuous mode, press the on/off switch (1) again.
Fitting sanding sheets

Take sanding paper of the required grain size and place it on the sanding pad. Make sure that the perforations in the
paper correspond with those on the sanding pad. Press the paper firmly on the sanding pad.
The sanding paper must be
fitted firmly on the sanding pad
and should not come loose.
Never use the machine for
sanding magnesium workpieces.