Programming and settings
funkhandsender_hsrt5-15_manual_rojaflex_06_19.indd 9
15.07.2019 09:10:07
3.
Add handheld transmitter
On an already learned in
station, press the K2 button to
select the desired channel. (or
K1) on an already
programmed channel.
Then select the channel you
want to add to the NEW
station to be taught in by
pressing the K1 (or K2)
button (the channel
highlighted in black is
selected).
Press the programming button
P2 (back side) 3 times on the
hand-held transmitter that has
already been taught in.
Then press the
programming button P2
(back side) once on the
hand-held transmitter to be
newly tuned in.
The motor (shutter) briefly
moves UP/DOWN and/or
receiver beeps.
OK – First code programming
successfully completed!
9
Important:
In systems with SI (single directional system / one-way communication), the P2
key of the hand-held transmitter that has already been taught-in is only pressed twice!
This concerns e.g. the MLSF/MLMF drives and the external receivers REHK-1 and RUE-UP.
Please observe the instructions of the respective receiver/motor.
BI
P2
SI
BI
P2
SI
For further information, please refer to the instructions for Rojaflex radio tube motors or
radio receivers.
