rojaflex 90100087, Original Assembly And Operating Instructions, Page: 6 / 20

6
www.rojaflex.com
Inserting the battery / changing the battery
The battery is (depending on the transmitter model) supplied loose or already installed and secured against
discharge with a protective foil. Open the battery compartment by turning the cover (e.g. with a coin),
remove the protective film and insert the battery into the battery compartment with the + (plus) side facing
up.
Then close the battery compartment again.
The K1 and K2 keys can be used to switch between the individual channels (1-5).
The channel highlighted in black is active in each case.
As soon as the “ a ” (after channel display 5) is highlighted, group control is active.
All programmed receivers are controlled simultaneously.
The key assignment may differ depending on the model:
K1= K- (minus) / K2 = K+ (plus)
Depending on the frequency of switching
operations, we recommend replacing the
battery at least every 2 years.
Please do not dispose of batteries in
household waste! Take them to an
appropriate disposal station.
ATTENTION!
Do not swallow the battery!
Danger of chemical burns!
Function overview / changing the battery
P
S1 B1
Op
en
-
Cl
os
e
UP
5-channel wall transmitter WSTR-5
UP
P2
Orientation
guide
DIP switch*
One-way/two-
way commu-
nication
DOWN
Wall transmitter - back side
K2
STOP
K1
not do-
cumen-
ted
Battery compart-
ment
not do-
cumen-
ted